Azden 1201VMX Broadcast Professional UHF Wireless System Get Azden 1201VMX Price / Buy Online

Shop With Confidence! Video Direct® is an Authorized Internet e-tailer for Azden and Many Other Fine Brands!

Replacing the Azden 1200VMX system, the Azden 1201VMX is a complete system which includes the 1201XT XLR plug-in transmitter and the 1201URX/VM receiver. The 1201URX/VM receiver and 1201XT transmitter feature 188 digital frequencies from which to choose, so you'll always find a clear channel. This broadcast professional wireless camera-mount mic system uses new UHF frequencies (638.125 to 661.875 MHz) to avoid interference from HDTV broadcast transmission.

Replacing the 1200URX/VM, the Azden 1201URX/VM Broadcast Professional UHF Wireless Receiver offers a new noise reduction circuit with improved S/N ration and dynamic range. The 1201URX/VM Receiver is mounted in an IDX^® V-Mount adaptor case. The Azden 1201URX/VM receiver features true diversity electronics in conjunction with removable twin high-gain antennas and Azden's proprietary DLC (Diverstiy Logic Control) circuity for superior, noise-free reception. State-of-the-art dielectric filters improve image rejection and 5th order filters offer an improved S/N ratio. The 1201URX/VM Enhanced Performance UHF Wireless Receiver's enhanced performance assures you of the highest image rejection combined with the finest in audio clarity. The crystal-controlled, PLL-synthesized mixer/local oscillator provides for extremely accurate frequency selection while the twin-antenna true diversity dual front-end reduces multipath distortion caused dropouts to near zero.

Replacing the Azden 1200XT transmitter, the Azden 1201XT is a compact plug-in transmitter which converts XLR microphones to wireless using a special 'lock-down' XLR connector for a secure grip. The 1201XT is designed to work with either the 1201URX/VM, 1201URX/VM or 1201URX/VM Azden 188-channel professional on-camera UHF receivers. The 1201XT is a frequency-agile transmitter with 188 on-board user selectable UHF frequencies, so you'll always find a clear channel. This camera-mount wireless microphone system uses new UHF frequencies (638.125 to 661.875 MHz) to avoid interference from HDTV broadcast transmission. The 1201XT also features a large LCD readout. Thanks to newly-designed circuitry, the 1201XT operates for 6-8 hours using two AA Alkaline batteries. The 1201XT also features 48V phantom power capability.

Azden 1201URX/VM Broadcast Professional On-Camera UHF Wireless Receiver

Azden 1201URX/VM Receiver Key Features

188 User-Selectable DTV-Compatible Frequencies Covering Four UHF TV Bands With LCD Readout

For broadcast professionals, Azden's 1201 Series UHF offers 188 digitally selectable UHF frequencies in a very compact and lightweight package. Channels can be selected by setting the LCD display to either the Frequency or Channel views. This wireless camera-mount system uses new UHF frequencies (638.125 to 661.875 MHz) to avoid interference from HDTV broadcast transmission.

True Diversity System With Two Complete Front Ends and High-Gain Antennas

A true diversity front end with twin antennas reduces multipath distortion caused dropouts to near zero.

Integrated IDX^® V Mount

The 1201URX/VM is mounted in an IDX V-Mount adaptor case and works directly from camera's battery.

Proprietary DLC (Diversity Logic Control) Circuitry

Azden's proprietary DLC circuity provides superior, noise-free reception and reduced dropouts.

State-of-the-Art Dielectric Filters

State-of-the-art dielectric filters throughout, for improved image rejection and superior diversity isolation.

High 5th Order Filters For Improved S/N Ratio

Multi-Function LCD

Multi-function LCD shows channel number and frequency, battery info, AF level and diversity operation. As the 1201URX/VM chooses which antenna is receiving the best signal, the 'A' or 'B' segment of the LCD display will illuminate. As the RF signal from the transmitter gets stronger (or weaker) the number of illuminated LCD segments in the display will change -- with 3 segments being the maximum and best. Similarly, the AF (audio level) segments will light from 1 to 3 segments as the audio gets stronger or weaker.

Mic/Line-Out Switchable

Select either LINE or MIC depending on which input is being used on the camera.

Azden 1201URX/VM Receiver Specifications

Effective Operating Range:

200 ~ 300 ft (60 ~ 100m)

Operating Frequency:

UHF band, 188 user-selectable channels 638.125 to 661.875 MHz

Receiving System:

True Diversity

Modulation Mode:

FM

Oscillator:

Phase Lock Loop Synthesizer

Operating Temp. Range:

14° to 122° F (-10° to 50° C)

Frequency Response:

50Hz - 15kHz (±1.5dB)

RF Sensitivity (12dB SINAD):

1.2µV

RF Squelch Level:

-95 dBµ

Adjacent Channel Selectivity:

>70dB (±250kHz)

Intermodulation:

>65dB

Noise Reduction:

Expander (THAT)

Audio Output (balanced):

+4 dBm @ ± 40 kHz Deviation (Line)
-40 dBm @ ± 40 kHz Deviation (Mic)

Output Impedance:

600 Ω

Image Rejection:

>93dB

IF Rejection:

>93dB

Audio THD:

<0.8%

Signal/Noise Ratio

>62dB (±5kHz) "A" Weighted

Power Requirements:

12VDC (11.0 - 15.0 VDC) from Camera

Dimensions (W x H x D):

3.2" x 5.9" x 2.4" (82 x 150 x 60 mm)

Weight:

1 lb. 10.45 oz. (750g) with antennas

Azden 1201XT Wireless XLR Plug-in Transmitter

Azden 1201XT Transmitter Key Features

Plug-in XLR Microphone Transmitter

Convert any XLR microphone into a wireless. Usng a special lockdown XLR connector for a secure grip on your mic, the 1201XT also features 48V phantom power capability.

True 48V Phantom Power

Allows you the flexibility to use dynamic or condenser microphones (48V or less) with the 1201XT.

Input Level Control

The audio input level control enables you to adjust the input level of the microphone. Turn clockwise to increase, or counter-clockwise to decrease the input gain.

Power and Audio Switches

The power ON and OFF switch enables and disables all transmitter functions while the Audio switch ON and OFF turn just the transmitter's audio signal on and off. Switching the Audio to OFF will act as a mute that maintains the RF signal but turns off the audio.

188 User-Selectable DTV-Compatible Frequencies Covering Four UHF TV Bands With LCD Readout

For broadcast professionals, Azden's 1201 Series UHF offers 188 digitally selectable UHF frequencies in a very compact and lightweight package. Channels can be selected by setting the LCD display to either the Frequency or Channel views. This wireless camera-mount system uses new UHF frequencies (638.125 to 661.875 MHz) to avoid interference from HDTV broadcast transmission.

Multi-Function LCD

Multi-function LCD shows channel number and frequency, battery info and AF level.

Runs On Two AA Batteries

Thanks to newly-designed circuitry, the 1201XT operates for 6-8 hours using two AA Alkaline batteries and also features 48V phantom power capability.

New Compander Circuit For More Natural Sound

Azden 1201XT Transmitter Specifications

Effective Operating Range:

200 ~ 300 ft (60 ~ 100m)

Operating Frequency:

UHF band, 188 user-selectable channels 638.125 to 661.875 MHz

Modulation Mode:

FM

Operating Temp. Range:

14° to 122° F (-10° to 50° C)

RF Power:

25mW

Antenna:

¼ wavelength (internal)

Frequency Response:

50 Hz - 15 kHz

Reference Deviation

± 5 kHz (-60 dBm - 1 kHz input, Mic)
± 40 kHz max deviation

Noise Reduction:

Compander (THAT)

Phantom Power:

48V ±2V @ 2mA

Power Requirements:

3V DC (Two AA Alkaline Batteries) @ <180mA - 290mA with Phantom Power ON

Battery Life:

6 - 8 Hours (Alkaline Batteries)

Max Modulation Sensitivity

+20dBm ~ 0dBm

Dimensions W x H x D:

1.6" x 4.9" x 1.6" (40 x 114 x 40 mm)

Weight With Batteries:

6.4 ounces (180g)

Back to Azden UHF Wireless Microphone/Receiver Systems